- Home
- ยป
- Our Products
- »
- CED Ultrafilters
CED Ultrafilters
CED Ultrafilters
Minimum Order Quantity: 1 Unit
Material | SS/ PVC |
We are a Manufacturer of CED Ultrafilters. Our product range also comprises of Purification & Recovery Systems, Ultra filtration and Plating Bath. These plants consists of UV Sterilization method, which is the safest method of preventing and reducing problems from raw water.
Specifications:
Membranes : 4” & 8” High Flow PVDF
Membrane Housings: High Grade PVC/ SS
Automation :Control Panel with/without PLC
Pumping: Feed/Cleaning Pressure Pumps
CIP : ‘Cleaning In Place’ PP Tank for Membrane
Filtration: Bag Filters – S.S./PP Fabricated
Monitors: Pressure Monitors – Glycerin Filled
Flow Monitors - Digital & Rotameter
Switches: Pressure Switches
Level Switches
Piping: Std PVC/ PVC-U - +George Fischer+ or Equivalent
Stainless Steel - Fabricated.
Frame : S.S./ M.S. Powder Coated
Features:
System Construction:
We designs systems to produce 10 lpm (2.5 gpm) +/- 10% from each 8” (8040) UF element. The system is manufactured to provide reliable, steady long-term performance, the customer avoids the frustration of unexpected system performance after start-up. Our systems are robust — an element can be taken off line for cleaning, replacement, or “rest” without placing stress on the remaining elements.
Clean In Place (CIP) System:
Our CIP has superior design features that make for reliable performance. A Flush and Drain valve is part of the clean return piping, allowing heavier paint solids to flow back to the ED tank and not into the CIP clean tank, thus saving paint solids. A low level switch installed inside the CIP tank will stop the pump when the tank’s liquid level is below minimum tank depth to protect the pump from cavitations. The CIP is included with a solenoid valve also for DI water flow. UF membranes are also protected by a filter bag vessel installed in the CIP piping that removes dirt from the cleaning solution before it flows back into the UF Elements.
Bag Filters:
Our systems include individual bag filters (one filter for each Element), each with its own isolation valve(s). This is a standard feature with 2 membrane system also. So that bag filters can be serviced without interrupting paint flow to any Element. The use of several bag filters provides a duplex system where filtered paint is always being sent to the UF Elements.
Frame:
The sturdy powder-coated frame is constructed to support the piping and UF Housings during shipment and operation at your plant.
Components:
Cooling Coil :
1 inch stainless steel serpentine coil cools cleaning solution, increasing cleaning cycle time by as much as one additional hour.
Process Instrumentation :
Digital Pressure Sensor - Conductivity meter - pH meter - Analog Temperature Gauge - Total Permeate flowmeter - Bypass Valves and Piping, and other process gauges can be installed on the UF System upon requested.
Filter Bag & Housings :
We provide Clamping system Bag filter housing even standard swing bolt type vessels are also available, with filter bags available from 10 µ to 100 µ.